Water oil radiator Ducati 959 Panigale / Corse 2016 - 2019 | made by Febur Italy

#FE1332

#FE1332

Made of aluminum.
With bleed screw to speed up cleaning.

To fit under stock radiator.

It fits the stock thermostatic valve.
It needs to remove stock air fun.
With mesh guard on the front.

All hardware included for an easy mounting.
It fits with stock bodywork or racing bodywork.

It increases engine cooling.

Developed with Ducati Barni WorldSBK Team.

For the Febur water cooler, you should use demineralized water or other specific fluid for radiator.

Weight 5.247 lb | 2.380 kg

#FE1333

#FE1333

Made of aluminum.
With bleed screw to speed up cleaning.

To fit under stock radiator.

The kit to remove thermostatic valve is included.
It needs to remove stock air fan.
With mesh guard on the front.

All hardware included for an easy mounting.
It fits with stock bodywork or racing bodywork.

It increases engine cooling.

Developed with Ducati Barni WorldSBK Team.

For the Febur water cooler, you should use demineralized water or other specific fluid for radiator.

Weight 6.570 lb | 2.980 kg

#FE1475

#FE1475

#FE1475

#FE1475

Made of aluminum.
With bleed screw to speed up cleaning.

It mounts with or without stock air fans.
With mesh guard on the front.

You should use stock hardware and hoses for fitting.
It fits with stock fairing and stock exhaust system or with racing fairing and racing exhaust system.

Developed with Ducati Barni WorldSBK Team.

For the Febur water cooler, you should use demineralized water or other specific fluid for radiator.

Thickness 1.77 in | 45 mm
Weight 2.491 lb | 1.130 kg

#FE1338

#FE1338

Made of aluminum.
With bleed screw to speed up cleaning.

Kit to remove thermostatic valve is included.
Battery holder included.
With mesh guard on the front.

All hardware included for an easy mounting.

It fits with racing bodywork only.

You must check oil pressure before using.

Developed with Ducati Barni WorldSBK Team.

For the Febur water cooler, you should use demineralized water or other specific fluid for radiator.

Weight 10.450 lb | 4.740 kg

#FE1432

#FE1432

Made of avio fiber.

To be used with #FE1338 radiator.
It fits with racing bodywork only.

Developed with Ducati Barni WorldSBK Team.

Weight 1.102 lb | 0.500 kg

#FE1331

#FE1331

Made of aluminum.
With bleed screw to speed up cleaning.

It needs removing stock air fans.
With mesh guard on the front.

All hardware included for an easy mounting.
Kit to remove thermostatic valve is included.

Approved for Stock races.

Developed with Ducati Barni WorldSBK Team.

For the Febur water cooler, you should use demineralized water or other specific fluid for radiator.

#FE1313

#FE1313

With silicone hoses.
For stock radiator.

Developed with Ducati Barni WorldSBK Team.

Weight 1.285 lb | 0.583 kg