Triple clamp Yamaha R6 / ABS 2006 - 2022 | made by Melotti Racing Italy

#PSYA206P1S

#PSYA206P1S

Keeping unchanged the standard spacing between the forks and the offset of the steering tube, this fork bridge boasts a noticeable reduction in weight from 526 g to 478 g.

Retaining a great rigidity in the braking phase, and thanks to its openings, it allows a progressive torsional capacity in order to ease the cornering, a determinant factor for the rider who wants to push the bike to the limit, resulting in a better feeling on the front end.

To be noticed the introduction of two ribs developed to keep the torsional characteristics of the fork bridge in order to obtain a further lightening of the bridge itself.

We confirmed the presence of the vernier, an element first introduced by Melotti Racing and very appreciated for having an accurate reference of the angle of the handlebars.
Indeed, once the preferred riding setting has been found, it can be easily reproduced after mounting / unmounting operations on the front end.

The fork top bridge is anodized and it comes with stainless steel bolts with tapered cap.

This fork top bridge does not allow to mount the original key block.

#PSYA206S1S

#PSYA206S1S

#PSYA206S1S

Keeping unchanged the standard spacing between the forks and the offset of the steering tube, this fork bridge boasts a noticeable reduction in weight from 526 g to 478 g.

Retaining a great rigidity in the braking phase, and thanks to its openings, it allows a progressive torsional capacity in order to ease the cornering, a determinant factor for the rider who wants to push the bike to the limit, resulting in a better feeling on the front end.

To be noticed the introduction of two ribs developed to keep the torsional characteristics of the fork bridge in order to obtain a further lightening of the bridge itself.

We confirmed the presence of the vernier, an element first introduced by Melotti Racing and very appreciated for having an accurate reference of the angle of the handlebars.
Indeed, once the preferred riding setting has been found, it can be easily reproduced after mounting / unmounting operations on the front end.

The fork top bridge is anodized and it comes with stainless steel bolts with tapered cap.

This fork top bridge allows to mount the original key block.